This post may contain affiliate links. Read my disclosure policy here.

How To Make Frozen Olaf Pinata Easy DIY Tutorial

 How To Make Olaf Pinata Easy DIY Tutorial – It was my daughter’s birthday few weeks ago, as you can see we had Frozen Theme for her birthday party.

How To Make Olaf Pinata Easy DIY Tutorial I absolutely enjoyed crafting handmade decor for her party like burlap and lace birthday banner, white snowy backdrop, Frozen blue tutu skirt, but my favorite crafty project was this Olaf Pinata.

I was so proud of myself since I have never made pinatas before and when I made Olaf Pinata it made me smile to see how happy my daughter Ani was.

It is not hard to make as it seems and it cost me around $5.00 not bad compare to buying it online for $60.00.

Olaf PinataTo make Frozen Olaf Pinata you will need:

one white poster paper

3 balloons


homemade mod podge

old newspaper

white paper



orange felt or paper

recycled cardboard

hot glue gun


cotton balls

tree branches

Paper cut in half.How to make Olaf Pinata:

1. Cut white poster in half.Paper cut in half again.

2. Then cut one half in half again.How to make Olaf Pinata, first blow up a ballon.

3.  Blow a big size balloon.How to make Olaf Pinata

4. Cover with 2 1/4 of the poster sheets on top and the bottom of the balloon, secure it with tape.How to make Olaf PinataOlaf shape piñata.Making Olaf piñata.It should look like this.

How to make Olaf Pinata5. Cut an old newspaper into 1-2 inch strips.Mod Podge paper.How to make Olaf Pinata using mod podge.6. Mod podge it and cover your balloon.Olaf piñata head drying.7. Let it dry.Using another ballon to make Olaf body.8. Make 2 more balloons but one smaller size than other then  mod podge them and let them dry.How to make Olaf PinataOlaf Pinata 3 piece.Pop ballons inside the Olaf body part.9. Pop the balloons to make olaf pinata - frozen10. Cut 2-3 inches off the top, that is going to be our to make Olaf face.11. Cut out Olaf’s nose just like in this pic.

Olaf head is ready for painting.12. Using a glue gun glue the noise to Olaf’s to make olaf smile.13. Take 2 foil papers and shape them up like a comma shape. Olaf smiling.

14. Attach them to the both sides of the mouth using glue gun.

Smiling Olaf.Mod Podging white paper on Olaf Piñata.15. Mod podge Olaf’s head and 2 other balloons with white paper.

Olaf nose.16. Make Olaf’s to make olaf nose.Hot glue nose to Olaf Head.

17. Glue it to Olaf’s face.Applying the top of the piñata.

18.  To make a cover for the top of the head cut out a circle and 3 strips of cardboard. Attaching hot glue.19. Using a hot glue glue it to the inside of the head.

How To Make Olaf Pinata Easy DIY Tutorial Cardboard with two holes for the head of the piñata.20. Make a hole then glue it to the top of Olaf’s head. (I accidentally make two holes)

Everything is glued together.This is how it looks inside.

Twine is attached to the cardboard.21. Cut out a square shape cardboard make a hole and knot a string thru it.

Twine is hot glued it to the cardboard.22. Add some hot glue.

Twine is attached to the piñata head.

23. Add the string from inside of the head.Pinata top is ready.

23. To attach Olaf’s body parts cut out cardboard paper strips and glue them to the inside.How to attach Olaf body.24. Add hot glue on top of the strips and attach it to Olaf’s head and hold it until glue cools off. Mod Podge the neck with white paper.Olaf Hands craft out of card board. 25. Using cardboard make two hands and glue them to Olaf’s body.

Hands attached to the Olaf belly.Olaf eyes attached to the piñata.Glue small tree branches to the top of Olaf’s head

Cotton balls.To decorate Olaf unroll cotton balls.

Cotton balls are ready to coat Olaf's body.Lots of them.

How To Make Olaf Pinata Easy DIY Tutorial Cover Olaf’s body with cotton using hot glue gun.

How To Make Olaf legs.To make legs cut two poster strips and glue two sides together.

How To Make Olaf legs.Glue small strips to inside of the leg.

Legs attached to Olaf Pinata.Add more glue on top of the strips then glue them to Olaf’s lower body then finish covering Olaf’s body with cotton.

Olaf's head is coated with cotton balls.Glue white rectangle shape paper to the top of Olaf’s mouth and black piece of paper to the bottom of Olaf’s mouth to cover his insides.

Eyes craft.Draw two big eyes and glue them to Olaf’s head.

Olaf Pinata all ready for the party.I forgot to add eyebrows and Olaf’s buttons =(

I hope you liked this tutorial.

If you make Frozen Olaf Pinata please tag my name @munchkintimeblog or #munchkintimeblog on Instagram, I would LOVE to see your creations!

Let me know if you have any questions.

Need more easy kid crafts ideas? Click Here to get inspired.

Thank you for stopping by!

Quote of the Day

Quote of the Day -----> /



  1. Good morning! I have the piñata almost ready, but I don’t understand where it will break and go out the candy, I want to be sure before gluing all parties! I hope you can answer soon, the birthday is tomorrow !!! thank you very much!!

    • Good Morning Marina! I placed candy in the stomach and when we were breaking Olaf his neck broke, so we just flipped him while kids were holding their hands to catch the candy. I hope that answers your question. I would recommend cutting out little hold on the bottom of his stomach (middle part of his body) and not gluing the bottom to much that way kids can break the bottom first then the candy can fall thru the bottom of the middle part of his body. I hope that helps.

  2. Hi! I’m from Croatian! Radim birthday gift my little kumi.Tebam help! I wonder how you cut out the smaller and larger part of the body and merged. That part of me is not very clear. Pre’m very grateful. Ivana

    • Hi Ivana! For the smaller and larger part of the body I just used balloons and newspaper, and mod podged newspaper strips on the balloon. Then I let it dry for one night. So no need to cut anything for the smaller and larger part of the body. I hope that answers your question.

      • Sorry I ‘m not well explained . How to connect the head and neck and neck with the body that you ‘re part of the cut that you can get the form of Olaf. A little coiled shape . For how to connect if you do not cut off part of which connect parts of the body . Of course this is all patched up with hot glue . I hope I have now with my bad English a little better explained . how to connect the pieces and get a little rolled up Olaf. Thanks again !

        • Hi Ivana, I cut out 3 strips and hot glued half of the strips on the inside edge of the mold. I waited tell it cooled then add some more hot glue to the other half of the strips and glue the whole mold to the head. I hope that explains how to attach neck to the body.

  3. You’ve got such an eye for beautiful things and it shows beautifully in your pictures! I love the choice of light and how you arrange your photos! Just truly awesome, good job!
    And this Olaf pinada, my kids would die if they got on for their birthday)))

    • Wow, thank you so much Marina for such a sweet comment. Yes my daughter had so much fun Helping me to make this Olaf Pinata and taking pictures with him!
      About pictures I can say same thing about you dear, your pictures should be in the food magazines. Every time I see them on Instagram, I can’t stop looking at them! You are an amazing food stylist and photographer!

  4. Thank you very much for sharing that beautiful piñata. I’m making one for my friend’s Daugther
    Hope it’ll be come nice!!

    • Thank you for stopping by Michela! I hope it will turn out beautifully for you! Just make sure to take some time. Also share your creation with us by tagging #munchkintimeblog on Instagram! Good luck! =)

  5. we are in the process of making this right now and just realized that you dont mention which portion of the body the candy will be in…since the middle isnt open to the bottom portion…

Leave a Reply

Your email address will not be published. Required fields are marked *